RF 75
.jpg "1.0-2.3 (Group)") 1.0 / 2.3RF connector used in high speed digital tele communication systems. Interfaces to CECC 22230. Surface mounted multi-coax modules available.
|
|
RF Connector designed to meet the requirements of DIN 47295 and CECC 22240 with screw, or push pull, couplings to ensure mating integrity.
|
|
Even with the wide range of configurations, ITT recognized a gap between the 7- and 37- position connectors. The solution to closing this distance in contacts is the recently developed APD 19-way connector, which utilizes patent-pending technology related to the locking feature. As the name indicated, this version features 19 contacts, with the option of increasing the number to 27 upon request. For example, if customers require more contacts, smaller contact sizes can be implemented. Conversely, if a customer requires a connector capable of carrying a bigger load, the pin count can be reduced by using higher power contacts up to 50mm2 and AWG0.
|
APD 37-way is a highly reliable, cost effective multi-pin connector with signal contacts (multi-layout power / signal on demand). It offers wire to wire and wire to board connection solutions.
|
D Subminiature
|
Qualified to MIL-C 24308. High reliability with fixed contact in solder cup, straight and 90° PC contact terminations.
|
|
High performance connectors with machined solder cup contacts; US Standard and European Standard footprints.
|
|
|
The D Subminiature Eurostyle connector is a product line extension of the well known D Subminiature family originally invented by ITT Industries, Cannon.
|
|
D*U is a low cost crimp-type D-Subminiature series, offers both machined and stamped contacts for crimp applications.
|
Rack & Panel
|
DPA series is a rugged, miniature rack and panel connector utilizing maximum insert space in a one-piece shell. DPAMA plugs are DPA plugs with the proven Little Caesar contact assembly for rear insertion, release and extraction of crimp type contacts.
|
|
DPGM, DPJM, and DPJMB connectors are designed for applications where space and weight are prime considerations.
|
|
|
Speedy D connectors terminate ribbon cables without stripping and without splicing.
|
MIL-DTL 5015
|
Designed and qualified to Mil-DTL 5015. Environmental resistant with solder termination. Similar to MS A&B series except have resilient insulators and wire sealing grommets. This series includes integral cable clamps for wire strain relief at the rear of the connector. O-rings provide sealing at the interface. Crimp contacts are available.
|
|
Designed to Mil-C 5015 specifications. High reliability commercial and industrial connector. Proven track record of performance and quality. General purpose connectors now available in RoHS compliant version.
|
|
|
.jpg)
The new NDD High Density Dual Row Nano Connector family is a metal shell connector that meets or exceeds all performance requirements of MIL-DTL-32139. This next generation rectangular connector features the highly reliable twist pin contact system. Contact spacing is on 0.0226" centers. Connector is designed to withstand high shock and vibration environments.
|
RF 50
|
50 ohm RF connector. Rapid connect and disconnect & small size. Used in applications where size and weight are critical. Up to 4 GHz.
|
|
50 ohm RF connector. Screw-on mating allows allows a low VSWR under vibration. Up to 12.4 GHz.
|
|
|
|
|
|
|
|
Microminiature filter connector with Contacts on 1,27 mm (.050 inch) center spacing. Designed to meet applicable portions of MIL-PRF-83513.
|
Filter rack & panel connector with low insertion force contacts, field replaceable inserts. Can accommodate up to 800 size 22 contacts in one connector.
|
Cannon Chip-on-Flex - the ceramic planar array capacitor block has been replaced by a flex circuit where individual chip capacitors are surface mounted on a pad adjacent to the feed thru contact.
|
.jpg)
Filter miniature circular connectors designed to meet applicable portions of MIL-C-26482, Series 2 or MIL-C-83723, Series 1.
|
.jpg)
Filter rack & panel connector, available in 4 different sizes to accommodate up to 424 contacts.
|
Microminiature filter connector with Contacts on 1,27 mm (.050 inch) center spacing. Designed to meet applicable portions of MIL-PRF-83513.
|
|
Sealflex 2 microwave cable assemblies are designed for applications requiring consistent microwave performance through to 18 GHz and may be used with minimal degradation to 26 GHz with SMA connectors.
|
|
Cannon Coaxial Terminators provide a low cost means of joining cable to a printed circuit where engagement and disengagement are not required.
|
|
SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial equipment operating at frequencies up to 4 GHz (SMB) and 12.4 GHz (SMC).
|
|
Precision SMA connectors feature the MIL-C-39012 Series SMA interface and envelope configuration. They can be mated with all connectors meeting the MIL specification dimensions.
|
|
Between Series Adaptors are widely used for high efficiency transitions between various types of RF coaxial connectors.
|
|
Commercial SMA connectors are subminiature devices that provide repeatable electrical performance through the frequency range DC to 18.0 GHz.
|
|
SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial equipment operating at frequencies up to 4 GHz (SMB) and 12.4 GHz (SMC).
|
|
Fakra is a standard developed by the DIN group for RF connectors used in “Road Vehicle” applications. RF connectors are fitted with a color coded, and polarized diecast housing.
|
|
Mini RF connectors are the ideal solution for customers producing devices that require verification of antenna or circuit board performance. They are specifically designed for use with portable terminal interfaces and the inspection of microwave boards used at frequencies of up to 6 GHz.
|
|
This range of 50 ohm microminiature radio frequency connectors is suitable for both military and commercial equipment operating at frequencies up to 4 GHz (SSMB) and 12.4 GHz (SSMC).
|
|
This range of 50 ohm microminiature radio frequency connectors is suitable for both military and commercial equipment operating at frequencies up to 4 GHz (SSMB) and 12.4 GHz (SSMC).
|
Filter D Subminiature connectors using standard & high density contact layouts. Designed to meet applicable portions of MIL-C-24308.
|
.jpg)
Filter miniature circular connector designed to meet applicable portions of MIL-C-38999, Series I, II, III, IV.
|
1.0/2.3 connector series are widely used in applications requiring a high density solution and have become a standard
|
1.6/5.6 connectors are suitable for use in 75 ohm communication systems and have become the recognized standard in telecommunications in many parts of the world.
|
ITT’s wide range of Cannon Type 43 / SMZ connectors are extensively used in 75 ohm communication systems and have become the recognized standard in telecommunications in many parts of the world.
|
This innovative termination technique provides the QT-BNC with a high pressure, gas tight center conductor joint of exceptional mechanical integrity, without crimping the center contact.
|
ITT’s telecom baluns, for use in ITU G.703 applications, converts between a 120 ohm twisted pair and a 75 ohm coaxial transmission line.
|
APD is a direct, in-line and bulkhead sensor connector that is resistant to engine, transmission and brake fluid. It also boasts very low contact resistance, so you can benefit from maximum signal intergrity. APD is available in 1-, 2-, 3-, 4-, 6- and 7 position versions
|
APD is a direct, in-line and bulkhead sensor connector that is resistant to engine, transmission and brake fluid. It also boasts very low contact resistance, so you can benefit from maximum signal intergrity. APD is available in 1-, 2-, 3-, 4-, 6- and 7 position versions.
|
High perfomrance connectors according to VG 95234, environmental (IP67), shielding possible.
|
Low cost, enviromental connectors that meet the mechanical and electrical requirements of the automotive /industrial markets.
|
APD is a direct, in-line and bulkhead sensor connector that is resistant to engine, transmission and brake fluid. It also boasts very low contact resistance, so you can benefit from maximum signal intergrity. APD is available in 1-, 2-, 3-, 4-, 6-, 7-, 37 and 51 way position versions and has been designed to meet all DIN 72585 requirements.
|
APD is a direct, in-line and bulkhead sensor connector that is resistant to engine, transmission and brake fluid. It also boasts very low contact resistance, so you can benefit from maximum signal intergrity. APD is available in 1-, 2-, 3-, 4-, 6-, 7-, 37 and 51 way position versions and has been designed to meet all DIN 72585 requirements.
|
The APD 51-way connector offers the same features as the 37-way solution. Furthermore it is available in 2 versions, standard and secondary lock for added security.
|
Bayonet and threaded coupling, shielded, 3-9 shell styles, 5-22 amperes, 6-128 crimp, PCB, or wire wrap contacts.
|
Bayonet and threaded coupling, shielded, 3-9 shell styles, 5-22 amperes, 6-128 crimp, PCB, or wire wrap contacts.
|
Bayonet and threaded coupling, shielded, 3-9 shell styles, 5-22 amperes, 6-128 crimp, PCB, or wire wrap contacts.
|
The Snap Lock Environmental Series is environmentally sealed connector created for printed circuit board, black box, cable-to-cable or bulkhead applications.
|
|
The Snap Lock Environmental Series is environmentally sealed connector created for printed circuit board, black box, cable-to-cable or bulkhead applications.
|
The Multiway Range has six plan forms available and offers an extremely reliable, robust and versatile connector system, in which any of the Trident signal or coaxial contacts can be used.
|
Range of sealed circular connectors featuring plasic housings with metal bayonet coupling. Uses 13 & 30 ampere snap lock contacts
|
Low profile connector system. Machined contacts suited for power and sensitive signals.
|
Ringlock is a range of robust circular connectors for industrial applications.
|
.jpg)
The Trident series of contacts are based on standard cavity design. This enables the stamped, machined, PCB, solder, and coax contacts to fit into any of the connectors in the Trident connector system.
|
A range of sealed and shielded metal shell circular connectors to provide EMC protection. Uses 13 ampere snap lock contacts.
|
Low cost installation molded plastic board level and internal wiring interconnect. Up to 13 amperes. 2-36 contact density.
|
Universal Contact is an independent SMT contact which provides an electrical connection between a device and a PCB.
|
Complete solution of both cards and connectors which meet the stringent demands of portable product and communication applications
|
Ultrasonically welded covers. Available in both Type I and Type II packages. This package offers a wide variety of standard PCMCIA I/O connectors.
|
The STARCARD® Snappy, a frameless stainless steel snap-on PCMCIA card kit that allows a multitude of design options from a standard platform.
|
MICRO-D microminiature rack/panel connectors are used in applications requiring highly reliable, extremely small, lightweight connectors.
|
The MDM Metal Shell Connectors have been tooled in several coaxial layouts and offer the versatility of combining coaxial and signal lines in the same connector.
|
Designed for use with flex circuitry, flat cable, and printed circuit boards and multi-layer boards. Metal shell, 8 shell sizes, 9-100 contacts.
|
Hermetic microminiature connectors. Micro line connector: Contacts on 1,27 mm (.050 inch) center spacing.
|
|
Microminiature filter connector with Contacts on 1,27 mm (.050 inch) center spacing. Designed to meet applicable portions of MIL-PRF-83513.
|
BKAD/BKAE connectors feature rear release/rear removable, low insertion force contacts. They are interchangeable with the contacts used in the DPX series and permit retrofit of existing equipment.
|
Low insertion force contacts, field replaceable inserts, and both environmental and non-environmental versions. Comes with up to 800 size 22 contacts.
|
DPXNA (non-environmental, Type IV) and DPXNE (environmental, Types II and III) rack and panel connectors are designed to meet or exceed the requirements of MIL-C-81659, Revision B.
|
Available in 4 different sizes to accommodate up to 424 contacts. Qualified to MIL-C-81659
|
|
High performance environment-resistant, rectangular connectors, qualified to MIL-C-83733.
|
DPA series is a rugged, miniature rack and panel connector utilizing maximum insert space in a one-piece shell. DPAMA plugs are DPA plugs with the proven Little Caesar contact assembly for rear insertion, release and extraction of crimp type contacts.
|
The Cm2 series features a simplified connection design that replaces conventional circular connectors. Available in low and high voltage versions.
|
The Cm3 series features a simplified connection design that replaces conventional circular connectors. Features up to 8 power and 12 signal contacts.
|
Miniature circular series KPT and KPTB (thru-bulkhead) provides a broad range of general purpose solder cup connectors. While series KPSE offers a wide selection of miniature circular high performance crimp connectors.
|
|
Miniature circular connector series KPTC and KPTC-NG (NewGeneration) offer high contact density in a rugged metal shell.
|
The Cm5 series features a simplified connection design that replaces conventional circular connectors. Power up to 40 Amps.
|
DPGM, DPJM, and DPJMB connectors are designed for applications where space and weight are prime considerations. Their rectangular
|
.jpg)
Rectangular body. Quick-mating, high density, long life.
|
Rectangular frame, high pin count, panel mount connector. Quick-mating, high density, long life.
|
Rectangular body. Quick-mating, high density, long life.
|
The CGE environmental circular connector series are designed to transmit very high current at low voltage.
|
The FOMC 2, 4, and 8 channel connector are available as a cable plug, and several receptacle shell configurations. The 8 channel can also be used with less contacts i.e. 6,4, or 2 channels.
|
ITAC, ITT’s Ground Tactical connector system was designed primarily for harsh environmental conditions and utilizes industry standard physical contact ceramic ferrule and keyed termini.
|
Conforms to MIL-T-29504 fiber optic termini. Fits any size 16 cavity with no modification to connector.
|
|
The Snap Lock Environmental Series is environmentally sealed connector created for printed circuit board, black box, cable-to-cable or bulkhead applications.
|
The Snap Lock Environmental Series is environmentally sealed connector created for printed circuit board, black box, cable-to-cable or bulkhead applications.
|
The Vector connector offers low cost, light weight, environmental sealing with maximum space savings. High terminal density enable harnessing of both power (wire size 14-12 AWG) and signal (wire size 20-16 AWG) terminals within a single housing.
|
The MJS jackscrew series provides a reliable interconnect for board-to-board, board-to-cable and in-line cable-to-cable applications.
|
|
MIK: Accommodate up to 55 contacts on .050 (1.27) centers (equivalent to 420 contacts per square inch). Five keyway polarization prevents cross plugging.
|
MIKM: Similar to our MIK, except has a steel shell and receptacle for improved ruggedness and RFI resistance. It accommodates up to 85 twist pin contacts. Maximum temperature range - 55°C to + 125° C.
|
MIKQ: A quick disconnect metal shell and receptacle version that can be instantaneously disconnected yet provides a solid lock when engaged. Applications include commercial TV cameras, portable radios, military gun sights, airborne landing systems and medical equipment.
|
Microstrips provide an extremely dense and reliable interconnection solution in a minimum profile package, giving great application flexibility.
|
The Micro Edgeboard (MEB) connector series provides a combination of high density and high reliability for applications in airborne and space systems, computers and peripherals, and industrial /commercial control systems.
|
Size 16 termini for use in standard MIL-DTL-38999 connectors provide flexibility of combining electrical and optical circuits in the same connector.
|
|
The PHD Terminus System provides the industry’s highest and most table performance for multi-channel interconnects.
|
A subminiature all plastic high density "D" rectangular connector. The CDL is a general purpose connector with a peripheral o-ring and wire sealing gasket.
|
.jpg)
Meets MIL-DTL-38999 envelope dimensions including Standard polarization, Backshell Threads and Panel Cut-Out / Mounting Holes.
|
Size 8 terminus adapter allows any PHD optical terminus to be coupled into Combo D connector.
|
The PHD Panel Mount Connector incorporates a low profile design with a discrete keyed contact system for repeatable low loss optical performance.
|
8 channel High Performance, Load Releasing Optical Backplane Connector.
|
LC Compliant Fiber Optic Connector System to meet Telecordia GR-326-CORE
|
ITT’s Next Generation Connector (NGCON) combines proven technology and features from connector standards 28876 and 38999.
|
The Double Density D is a rectangular connector in the popular D Subminiature shell configuration featuring double the contact density in the same insert area.
|
NANO contacts incorporate the highly reliable Twist Pin concept, which allows continuity in very dense areas and under severe shock and vibration, requiring low engagement and separation forces.
|
NANO contacts incorporate the highly reliable Twist Pin concept, which allows continuity in very dense areas and under severe shock and vibration, requiring low engagement and separation forces.
|
NANO contacts incorporate the highly reliable Twist Pin concept, which allows continuity in very dense areas and under severe shock and vibration, requiring low engagement and separation forces.
|
MD*B-PCB connectors use standard MD*B all plastic shells and are designed for use with flex circuitry, printed circuit and multi-layer boards. They are easily mounted and soldered and provide high density/high reliability in board-to-board and board-to-cable applications.
|
|
CA-COM commercial signal and power connectors are designed to resist aggressive fluids like fuel, oil, etc. Compatible with MIL-DTL-5015 and VG95234
|
|
Connectors combining multiple interconnect types; signal, coax, high power and high voltage contacts.
|
|
Low cost alternative to traditional through hole solder contacts, based upon specification CECC 75 301 802.
|
|
Hermetic military D connectors using standard and high density contacts layouts.
|
|
Full range of filter connectors providing EMI/RFI protection.
|
|
High performance connectors with machined solder cup contacts; US Standard and European Standard footprints.
|
|
Standard and high density crimp connectors without contacts.
|
|
Connector providing insulation displacement technology for either solid or standard wires.
|
|
|
|
General application connectors with stamped contacts for use in commercial applications.
|
|
|
|
|
|
Qualified to MIL-C 24308. High reliability with fixed contact in solder cup, straight and 90° PC contact terminations.
|
Designed and qualified to Mil-DTL 5015. Environmental resistant with solder termination.
|
Designed to Mil-C 5015 specifications. High reliability commercial and industrial connector.
|
Hardmetric Connector system developed according to IEC 61076-4-101
|
ITT Cannon's offering of cylindrical quadrax interconnect system. Designed around MIL-DTL-38999 series III, the KJAQ series offers high-speed ethernet connections in a familiar package.
|
ITT Cannon’s offering of Rack and Panel quadrax interconnect system. Designed to ARINC 600 requirements, the BKAD/E/F connectors offer Ethernet connections in a variety of configurations to meet your design needs.
|
|
The XLR Series features a quick disconnect latch lock along iwth a rugged design to withstand extended field use.
|
ITT's XLB male and female PCB flange mount receptacles are a plastic, low cost alternative to our metal XLM-PCB connectors.
|
|
ITT's male and female XLM-PCB metal flange mount receptacles offer durability, reliability, space savings and greatly improved EMI shielding over our plastic XLB-PCB connectors.
|
The Mini-XL connector is 40% smaller than the industries standard XLR connector. Intended to meet the demands for high density compact audio applications, this quick, one touch connect/disconnect, circular connector is designed to withstand extreme field use.
|
.jpg)
The Trident series of contacts are based on standard cavity design. This enables the stamped, machined, PCB, solder, and coax contacts to fit into any of the connectors in the Trident connector system.
|
The Trident series of contacts are based on standard cavity design. This enables the stamped, machined, PCB, solder, and coax contacts to fit into any of the connectors in the Trident connector system.
|
|
|
|
|