 Snap Together Rectangular (TST)These are low installed low cost connectors rated for up to 13 A and 250 V ac rms. They are typically used for circuit board and internal writing applications. Snap Together connectors facilitate easy assembly and removal of equipment such as motors, fans, and transformers.
|
|
The Slimline range offers a low profile connector system that is well suited for circuit board applications. The precision machined contacts are ideal for power and sensitive signals.
|
|
The Multiway range is an extremely reliable and robust series of rack & panel connectors. The design is based on the requirements of Mil-C-28748 and will accept any of the Trident signal or coax contacts. It is available in 6 arrangements ranging from 14 to 75 ways, together with a wide range of accessories and mounting hardware.
|
|
Ringlock is a range of robust circular connectors for industrial applications. It uses a metal bayonet coupling system for quick and reliable connections and thermoplastic bodies for low installed cost. The connectors are available in several sizes ranging from 4 to 48 circuits for signals up to 13 A or coax. With the addition of sealed cable clamp, the connectors can be water sealed to meet IP65.
|
|
Neptune is a range of circular connectors specifically designed for harsh environment applications. They are water sealed to IP67 and do not require blanking plugs for unused cavities. Contact arrangements include combinations of signal (13 A) and power (30 A) contacts. The mating uses a highly reliable bayonet coupling system with either high strength or metal or corrosion resistant plastic coupling rings.
|
|
TNM is a series of metal shell connectors that, when used with the shielded end bell, provides RF shielding from cable-to-equipment or cable-to-cable. Connectors and end bells are moisture sealed to IP67. They are ideal for applications that require the additional strength of metal shells.
|
 T2P Contacts
The Trident series of contacts are based on a standard cavity design. This enables the stamped, machined, PCB, solder, and coax contacts to fit into any of the connectors in the Trident connector system. In addition, the mating interface is standardized so that the various signal contacts (ranging from 14-26 AWG) will all mate together. The retention system of the contacts enables quick and cost effective assembly without special insertion tools.
|
|
The Trident series of contacts are based on a standard cavity design. This enables the stamped, machined, PCB, solder, and coax contacts to fit into any of the connectors in the Trident connector system. In addition, the mating interface is standardized so that the various signal contacts (ranging from 14-26 AWG) will all mate together. The retention system of the contacts enables quick and cost effective assembly without special insertion tools.
|
|
The Trident series of contacts are based on a standard cavity design. This enables the stamped, machined, PCB, solder, and coax contacts to fit into any of the connectors in the Trident connector system. In addition, the mating interface is standardized so that the various signal contacts (ranging from 14-26 AWG) will all mate together. The retention system of the contacts enables quick and cost effective assembly without special insertion tools.
|