APD 19-Way

APD is a versatile range of full plastic direct, in-line and bulkhead circular connectors that are resistant to engine, transmission, and brake fluids. This series is an ideal solution whenever harsh environment requirements, high sealing grades and vibration requirements must be met. APD 19-way is the latest addition to ITT’s APD connector range.

Based on ISO 15170 it adds additional features to the standard harsh environment capabilities. Secondary lock, adaptation of market available standard accessories and ease of assembly and disassembly not demanding any special tooling characterize this connector. Moreover, APD 19 is set up around a flexible design platform which allows for customized solutions up to 27 contacts. A variety of shell styles and accessories including 90-degree end bells allow for easy adoption to customer specific applications.

APD 1-Way High Power

APD is a versatile range of full plastic direct, in-line and bulkhead circular connectors that are resistant to engine, transmission and brake fluids. This series is an ideal solution whenever harsh environment requirements, high sealing grades and vibration requirements have to be met.

The APD 1-way connectors are derived from ISO 15170 and adapted to applications requiring high power. These versions cover wire ranges from 16 mm² up to 50 mm² power and a power consumption up to 245A. The combination of small size and high power make them an ideal solution for many applications. Machined and stamped contacts in variours sizes, materials and platings available. Variety of shell styles and accessories including 90 degree end bells allowing easy adoption to customer specific applications.

APD 2-Way High Power

APD is a versatile range of full plastic direct, in-line and bulkhead circular connectors that are resistant to engine, transmission and brake fluids. This series is an ideal solution whenever harsh environment requirements, high sealing grades and vibration requirements have to be met.

The APD 2-way connectors are derived from ISO 15170 and adapted to applications requiring high power. These versions cover wire ranges from 6 mm² up to 16 mm² power and a power consumption up to 105A. The combination of small size and high power make them an ideal solution for many applications. Machined and stamped contacts in variours sizes, materials and platings available. Variety of shell styles and accessories including 90 degree end bells allowing easy adoption to customer specific applications

APD 37-Way

APD is a versatile range of full plastic direct, in-line and bulkhead circular connectors that are resistant to engine, transmission and brake fluids. This series is an ideal solution whenever harsh environment requirements, high sealing grades and vibration requirements have to be met.

APD 37-way is a highly reliable, cost effective multi-pin connector with signal contacts (multi-layout power / signal on demand). It offers wireto-wire and wire-to-board connection solutions. According to ISO15170, the connector is dedicated for harsh environmental usage.

Various customer specific designs (e.g. different coding) are possible. Machined and stamped contacts in variours sizes, materials and platings available.

APD 4-Way

APD is a versatile range of full plastic direct, in-line and bulkhead circular circular connectors that are resistant to engine, transmission and brake fluids. This series is an ideal solution whenever harsh environment requirements, high sealing grades and vibration requirements have to be met.

APD 4-way connectors are the original DIN72585 (now ISO15170) versions using a 2,5 mm contact system.Designed for automotive applications they also meet the requirements of transportation, off-road and special vehicle markets. Machined and stamped contacts in variours sizes, materials and platings available. Variety of shell styles and accessories including 90 degree end bells allowing easy adoption to customer specific applications. Individual wire seals for sealed interconnect up to IP69k.

APD 4-Way High Voltage

APD is a versatile range of full plastic direct, in-line and bulkhead circular connectors that are resistant to engine, transmission and brake fluids. This series is an ideal solution whenever harsh environment requirements, high sealing grades and vibration requirements have to be met.

APD 4-way connectors are the original DIN72585 (now ISO15170) versions using a 2,5 mm contact system. Designed for automotive applications they also meet the requirements of transportation, off-road and special vehicle markets.

ITT has come up with a new high voltage version of the APD 4-way connector. Machined and stamped contacts in variours sizes, materials and platings available.

APD 51-Way

APD is a versatile range of full plastic direct, in-line and bulkhead circular connectors that are resistant to engine, transmission and brake fluids. This series is an ideal solution whenever harsh environment requirements, high sealing grades and vibration requirements have to be met.

The APD 51-way connector offers the same features as the 37-way solution. Furthermore it is available in 2 versions, standard and secondary lock for added security.

The connector features up to 8 mechanical key and visual color coding options for better mating identification and to avoid mis-mating. Machined and stamped contacts in variours sizes, materials and platings available.

APD 6/7-Way

APD is a versatile range of full plastic direct, in-line and bulkhead circular connectors that are resistant to engine, transmission and brake fluids. This series is an ideal solution whenever harsh environment requirements, high sealing grades and vibration requirements have to be met.

APD 6/7-way connectors are a derivate of the 4-way connector providing higher pin counts using a 1,6 mm connector system. Machined and stamped contacts in variours sizes, materials and platings available. Variety of shell styles and accessories including 90 degree end bells allowing easy adoption to customer specific applications. Individual wire seals for sealed interconnect up to IP69k.

APM

Cannon's APM Connector is a rugged, circular, small diameter, 4-way thermoplastic snap-in solution ideal for transport applicaions such as switches, relays, wipers and lighting systems. 

APV Vector

The unique trapezoidal shape of the connector housing assures polarization and reliability by preventing incorrect mating or damage caused by mismating. The dual ledge assures reliable mating. 

ARC 38999-Style with ARINC 801-Compatible Inserts

ITT Cannon’s ARINC 801-Compatible Fiber Optic Series is an end-to-end solution featuring Connectors, Termini and Cable Harnesses that enable the transmission of high speed data, video and signal transmission in harsh environments, where performance, integrity and reliability are essential. Designed for use in commercial aerospace, military and shipboard applications that require quick, accurate and reliable transfer of large amounts of data, ARINC 801-Compatible interconnects are fast, lightweight and capable of operating at transmission speeds of 10 gigabits/sec (Gb/S) or more.
 

ARINC 600 Rack & Panel Filter Connector TBKAD

Today’s commercial aerospace avionics manufacturers are placing more and more emphasis on the need to protect critical electronic systems from EMI, voltage transients and voltage surges at the connector interface. Our ARINC 600 Rack & Panel Filter Connector TBKAD provides the highest density pin outs, and the highly robust TBKAD Filter connector version provides the system-level EMI protection in the most effective way, as the box interface. This high performance connector is ideally suited for navigation systems, radar systems, avionics, flight control systems, flight management and TCAS.

ARINC-Style Quadrax Termini for KJA Connectors

Cannon's KJAQ 38999-Style Circular with Quadrax Contacts is a high-reliability interconnect solution used to deliver data rates up to 2.5 Gb/s. It is available with rear-release crimp pin or socket Quadrax contacts or front-release PC pin Quadrax contacts, as well as a number of 38999-style layout arrangements and shell styles. The Quadrax contact provides four signal pins with shield termination capability to yield a single Ethernet port. The crimp version of the Quadrax contact terminates twisted, shielded quad cable.

BKA C/D/E/F/X ARINC 600 Rack & Panel

Cannon's BKA ARINC 600 Rack & Panel Interconnect Solutions represent the standard for new Avionics  systems developed to support the Commercial and Military Air Transportation markets. These highly engineered, blind mate interconnects are available in three and six gang configurations and accommodate up to 800 low insertion force contacts including Multi-Signal Quadrax Contact Systems, among others. The inserts are field replaceable. BKA connectors are available in environmental and non-environmental versions. Size 22 Stamped PCB Contacts for BKA ARINC 600 Receptacles are also available, offering customers significant cost savings over traditional machined contacts. 

Black Zinc Nickel Plating

Innovative Black Zinc Nickel Finish is a RoHS-compliant, cost-effective and sustainable plating alternative to Cadmium. It provides long-lasting corrosion resistance to exposed connector surfaces used on commercial aircraft and military planes, transportation vehicles and marine transports. Black Zinc Nickel Plating offers the same level of harsh environment protection, temperature ranges and electrical performance as Cadmium finishes, but without the toxicity and negative environmental impact.


 

CA Bayonet Connectors (VG95234)

Cannon’s CA Bayonet is a versatile and extremely reliable connector series with a proven “reverse bayonet” coupling design that offers exceptional vibration protection.
 
It is designed to VG95234 spec, is ideal for a wide variety of application area and is available in  a number RoHS compliant plating options 

CA COM

The CA-COM Circular Connector series from ITT provides solutions for rugged industrial, transportation, and medical applications. Designed to meet industrial indoor applications, this series provides bayonet and threaded versions with Nickel-plated shells and as well as a wide range of layouts.

Cabling Solutions

ITT Cannon provides robust, electrical wiring interconnect system (EWIS) for coaxial, fiber optic, ribbon, flex and power termini.

From discrete overmolded wires, sealed cable to withstand high temperature and patch cords to complex, data bus wire harnesses with high density, miniaturized connectors, we work directly with our customers to develop specialized assemblies for virtually any application.
 

Cannon IT Series

Cannon IT Series is an environmentally sealed cable-to-cable connector solution incorporating thermoplastic housings, silicone rubber seals and wedgelocks that delivers rugged performance and superior resistance to moisture and temperature extremes.

The series features an integral latching system that provides visual and audible feedback and stamped and machined size 16 contacts (13A max) that require no special tools for insertion and extraction. Featuring multiple keying options and available in a variety of layouts, it is intermateable with comparable existing industry solutions incorporating both standard and enhanced seal retention designs. 

CGE

CGE products are the European VG military standard for high power / low voltage applications. These connectors provide a robust bayonet coupling mechanism, outstanding vibration resistance, currents up to 900A and full VG96929 approval.

CGL Circular Power Connectors

CGL is a series of circular metal connectors providing robustness, bayonet and threaded coupling, and safety provisions through usage of ground contacts. Up to 700V operating voltage makes this an ideal solution for powering industrial production equipment or motors while providing mateability with standard MIL-C-5015 or German VG military VG95234 connectors

Chip-on-Flex Filter Connectors

Cannon has advanced the state-of-the-art in filter technology with its Chip-on-Flex (CoF) design. This connector technology provides a significant performance improvement in thermal shock and vibration over traditional ceramic planar array technology. Our Chip-on-Flex filter connectors offer up to a 15% savings in weight over the ceramic planar array equivalent. It also protects critical circuits from electrical interference, providing a “stray signal barrier” upstream and away from electronic devices without impacting system function and performance. 

CLC

Superior environmental sealing IP68, Available in layouts of 2 and 4 contacts, Current max rating 5A, Secondary TPA lock system

Combination D-Subminiature (Combo-D)

The Combo-D Connector is designed for applications that require optimization of space while improving overall shielding. It offers the advantages of an industry standard shield I/O interconnect, with the flexibility of a customized special that can be designed for nearly any application. By combining multiple interconnect types into one fully shielded product, our Combo-D offering decreases the number of I/O interfaces and reduces the possibility of EMI/RFI leakage. This highly engineered solution is ideally suited for Aerospace & Defense, Industrial and Transportation end markets.

Combo-D with HEP Contacts

The Combo-D with High Efficiency Power (HEP) Contacts features canted coil spring technology that increases electrical current carrying capacity, improves efficiency and reduces costs. Designed in one of the smallest packages available, our HEP contacts use cutting edge technology to increase electrical current capacity up to 75% over standard size 8 contacts. From missiles and ordnance to shipboard radar and satellite systems, the Combo-D with HEP Contacts is highly engineered for use in a number of Aerospace & Defense applications. 

Connector Saver for Tight Tolerance 38999 Series III Fiber Optic Connectors - SVR

Extend the service life of connectors, contacts and cable harnesses that are subject to extreme use and repetitive mating and de-mating by installing an ITT Cannon Tight Tolerance SVR 38999 Series III Fiber Optic Connector Saver between the Unit Under Test (UUT) and test equipment. Our SVR 38999 Connector Saver protects your connectors by absorbing the wear and tear associated with mating and de-mating during the testing process, allowing your cable harness to remain in its original condition for final installation. It\ features a removable contact system that can be easily replaced after it becomes worn or damaged, with far less cost than replacing the mounted box cable harness.

CV 5015 Series III

High power connector series providing environmental protection with rear sealing grommets and pin interfacial seal.  Fully intermateable with existing Mil-DTL 5015 and Mil-DTL 83723 series type connectors.  Temperature range of -55 deg C to 200 deg C depending on connector class.  

D*/D*M PCB & Solder D-Subminiature

The D* / D*M PCB & Solder is a Standard Density D-Subminiature Connector used for a wide range of applications in Aerospace & Defense, Industrial and Transportation end markets. Available with a variety of accessories, this versatile and reliable D-Sub interconnect solution is highly engineered to perform in the harshest environments. 

D*A/ZD*A Commercial D-Subminiature

The D*A / ZD*A Commercial D-Sub is designed with crimp, solder cup, straight and right angle PCB contacts. Available in both Standard and High Density options, this versatile, high performance interconnect solution transmits data, power and signal in the harshest enviornments. It is ideally suited for Industrial markets, where it is often used in Telecom and Medical applications such as computer networks, commercial printers and durable medical equipment. 

D*H/DITBH Hermetic D-Subminiature

The D*H/DITBH Hermetic is a sealed D-Subminiature Connector that is ideal for pressurized bulkhead applications, with glass sealing for maximum sealing. This highly reliable, high performance interconnect solution is designed for use in harsh environment applications in the Defense, Industrial and Oil & Gas end markets.

D*MA D-Subminiature

The D*MA Hi-Rel D-Sub is engineered to perform in the harshest environments. Designed to transmit data, power & signal in a range of Industrial end markets and applications, the D*MA Hi-Rel D-Sub is available in a variety of styles, contact options & accessories, including Standard and High Density. 

D*NG Pressfit D-Subminiature

Featuring quick and easy press-in installation that eliminates the need for specialized tooling, the D*NG Pressfit D-Sub is a straight, Standard Density interconnect that eliminates the need for soldering to backplanes and PCBs. This highly engineered solution is designed for a range of harsh environment applications in Industrial and Transportation end markets.

D*U Crimp D-Subminiature

The D*U Crimp D-Sub is a Standard Density crimp connector using stamped and machined contacts. This highly engineered interconnect solution features quick and easy press-in installation that eliminates the need for specialized tooling. 

DL Series - Zero Insertion Force Connectors

The Cannon DL Series of Zero Insertion Force (ZIF) connectors fill the need in the medical commercial/industrial, computer and peripheral equipment market places for high performance, multiple-wire power and signal connectors. The metal version of the original DL connectors, the DLM features a minimum rated life of 10,000 mating cycles with no performance loss. They can be mated and unmated in less than two seconds with up to 360 contacts and offer enhanced environmental protection and EMI/RFI shielding.

DLM Series - Zero Insertion Force Connectors

The Cannon DLM Series of Zero Insertion Force (ZIF) connectors fill the need in the medical commercial/industrial, computer and peripheral equipment market places for high performance, multiple-wire power and signal connectors. The metal version of the original DL connectors, the DLM features a minimum rated life of 10,000 mating cycles with no performance loss. They can be mated and unmated in less than two seconds with up to 360 contacts and offer enhanced environmental protection and EMI/RFI shielding.


 

DLP Series - Zero Insertion Force Connectors

Cannon has developed a ‘Resilient Contact’ that provides reliable performance with contact wiping action directly on a PCB pad. A high density contact module enables a high pin count connector (136-408 contacts) and flexibility. The nickel plated aluminum housing along with the embedded grounding springs offer superior performance under the harshest EMI conditions. The DLP, like that of the DL, is capable of over 10,000 mating cycles. With the PCB acting as the mated contacts, electronics can be mounted at the signal source, thus reducing cross talk and minimizing real-estate. The DLP-408 is offered with mechanical shutters to meet the IEC requirements for finger protection. 

Double Density D-Subminiature (High Density) 2D Series

With an increased pin count from standard 50 to 100 contacts, the 2D, Double Density D-Sub Series features twice the number of contacts in the same standard insert area. This is achieved by using field-proven, highly reliable Centipin^{™ /}  Centisocket^™ contacts on .075 (1.91) centers in a positive contact alignment design. Also known as High Density D-Sub, this innovative connector solution is ideally suited for a wide range of  applications in Industrial end markets. 

Double Flange Receptacles for PCB Mounted D3899...

Cannon's 38999-Style Series III Double Flange Receptacles for PCB Mounting conveniently allow for attachment directly to the connector shell, improving grounding, reducing contact solder joint stress and eliminating extra hardware. They are highly engineered for use in high vibration, harsh enviorments. From military and commercial aviation, to communications systems and ground transports, these ruggedized connectors perform reliably and consistently.

This product is not covered by the QPL/QML.

DPA Rack & Panel

DPA connectors are rugged, blind mate, miniature rack/panel connectors that utilize maximum insert space in a single gang shell. Polarization is accomplished with a keystone cornored shell. The operating temperature is -55C to +125C (-67F to +257F). DPA connectors are available with float mount shells (DPAF). This option includes four rivets (.093 ID with a minimum of .032 float) with washers on the contact termination side of the connector. Other options include large flange shells (DPAL) and connectors with Little CAESAR Contacts (DPAMA)

DPGM-DPJM-DPJMB Rack & Panel

DPGM, DPJM, and DPJMB connectors are designed for applications where space and weight are prime considerations.Their rectangular shape provides maximum space utilization and permits easy removal of equipment for inspection and/or repair.DPGM and DPJM connectors feature crimp snap-in contacts with ring-type retention while DPJMB connectors feature the Little Caesar rear release contact retention assembly.

DPK 83733-Style Rack & Panel

DPK series are high performance environment-resistant, rectangular connectors engineered to be comparable with MIL-C-83733 (USAF).They feature crimp snap-in contacts in the dependable Little Caesar rear release contact retention assembly.This field-proven assembly permits contacts to be inserted and extracted at the rear of the connector.

This product is not covered by the QPL/QML.

DPX ARINC 404 Rack & Panel

The DPX connector comes in single, two, three and four gang versions and can accommodate up to 424 contacts. The DPX*MA connector features the LITTLE CAESAR contact assembly for rear insertion, release and extraction of crimp type contacts. DPXA shells utilize their keystone-shaped for polarization posts that are capable of providing up to 99 polarization positions. DPX (ARINC 404) can also utilize the Size 22 Stamped Contact on the F106 insert.

DPXNE-NA MIL-C-81659 Rack & Panel

DPXNA (non-environmental, Type IV) and DPXNE (environmental, Types II and III) rack and panel connectors are designed to meet or exceed the requirements of MIL-C-81659, Revision B.DPXNA/NE connectors are available in single through four gang configurations, with a total of 13 contact arrangements accommodating contact sizes 12, 16, 20 and 22, and combination standard and coaxial contacts.Environmental sealing is accomplished by wire sealing grommets and interfacial seals.

Fast Charge CCS 1 EV Charging

ITT Cannon’s new CCS 1 DC Fast Charging solution is fully designed to SAE J1772 standards and provides up to 150A continuous charging and power up to 150kW. This uncooled connector is available with various amperage, and cable length options, ensuring that it is ideal for a wide variety of customer applications.

Fast Charge CCS 2 EV Charging

ITT Cannon’s new CCS 2 DC Fast Charging solution is fully designed to DIN EN 62196-3 standards and provides up to 200A continuous charging and power up to 200kW. This uncooled connector is available with various amperage, and cable length options, ensuring that it is ideal for a wide variety of customer applications.

Fiber Optic Termini

ITT Cannon delivers high quality, high performance fiber optic termini and cable assemblies, for the Automotive, Commercial Aircraft, Industrial, Medical and Military Electronic industries. Our in-house capabilities allow us to design and manufacture singlemode and multimode systems along with terminating ferrule assemblies ranging from 1.25mm to 2.50mm.

Our termini delivers reduced insertion loss, less channel-to-channel variance and easy integration into High Density Interconnect Hardware. This includes the PHD “Little Ceasar” clip style contact retention system or the genderless contact system used in the NGCON.
 

FOHC Fiber Optic

ITT fiber optic contacts are a standard in the industry. We offer the most complete line of fiber optic contacts, engineered to fit today’s MIL-Spec circular, rack and panel, edgecard/LRM, and D Subminiature connectors.

FOMC Fiber Optics

Hermaphroditic design means plugs will mate with an identical plug as well as receptacles. The removable insert assures correcting mating and alignment. In the Cannon FOMC, ruggedness is combined with good optical performance, rapid coupling and attractive pricing.

 

GB/T - GBCE Electric Vehicle Charging Plug

Designed for the Chinese market, the GBCE Electric Vehicle Charging Plug is a GB/T EVSE to vehicle solution that provides low contact resistance and a minimum of 10,000 mating cycles. It is available for single and three phase charging systems and has a current rating up to 63A.

The new Gen 2+ contact system utilizes a canted coil spring design that delivers extended lifetime usage and minimizes mechanical stress, miss-alignment and power loss.

GB/T - GBCV Electric Vehicle Charging Connector

Designed for the Chinese market, the GBCV Electric Vehicle Charging Plug is a GB/T vehicle coupler solution that provides low contact resistance and a minimum of 10,000 mating cycles. It is available for single and three phase charging systems and has a current rating up to 63A.

The new Gen 2+ contact system utilizes a canted coil spring design that delivers extended lifetime usage and minimizes mechanical stress, miss-alignment and power loss.

GB/T - GBIE Electric Vehicle Charging Outlet

Designed for the Chinese market, the  GBIE Electric Vehicle Charging Outlet is a GB/T EVSE solution that provides low contact resistance and a minimum of 10,000 mating cycles. It is available for single and three phase charging systems and has a current rating up to 63A.

The new Gen 2+ contact system utilizes a canted coil spring design that delivers extended lifetime usage and minimizes mechanical stress, miss-alignment and power loss.

GB/T - GBIV Electric Vehicle Charging Inlet

Designed for the Chinese market, the GBIV Electric Vehicle Charging Inlet is a GB/T vehicle side solution that provides low contact resistance and a minimum of 10,000 mating cycles. It is available for single and three phase charging systems and has a current rating up to 63A.

The new Gen 2+ contact system utilizes a canted coil spring design that delivers extended lifetime usage and minimizes mechanical stress, miss-alignment and power loss.

HDx Series- High-Density, Small Form Factor

ITT Cannon’s HDx^TM Series offers a reliable, small form factor (SFF) solution in a lightweight, compact design. With breakaway or screw-lock breakaway coupling options, this high-density interconnect enables critical USB, HDMI or Ethernet high-speed data transmission. 

Cannon’s HDx Series comes in an anti-glare, non-reflective Ruthenium plating and is rated up to 20 meter sealing depth when mated. This combined with it’s high durability rating, provide end users with a dependable interconnect system in any mission critical  situation.  

HPC CCS1 EV - High Power Charging

An innovative liquid cooled High Power Charging (HPC) solution comprised of connector, cable and cooling unit. Available in CCS1 and CCS2 variants, and with 10,000 mating cycles, the solution enables continious charging up to 500A at 1,000V which can potentially deliver 60miles / 100km of charge to an electric vehicle within three to five minutes.

HPC CCS2 EV Charging

An innovative liquid cooled High Power Charging (HPC) solution comprised of connector, cable, and cooling units. Available in CCS1 and CCS2 variants, and with 10,000 mating cycles, the solution enables continuous charging up to 500A at 1,000V, which can potentially deliver 60 miles/100 km of charge to an electric vehicle within three to five minutes.

IEC - ECCE Electric Vehicle Charging Plug

Designed for the European market, the ECCE Electric Vehicle Charging Plug is an IEC (Type 2) mode 3 EVSE to vehicle solution that provides low contact resistance and a minimum of 10,000 mating cycles. It is available for single and three phase charging systems and has a current rating up to 63A.

The new Gen 2+ contact system utilizes a canted coil spring design that delivers extended lifetime usage and minimizes mechanical stress, miss-alignment and power loss.

IEC - ECIER Electric Vehicle Charging Outlet

Designed for the European market, the ECIER Electric Vehicle Charging Outlet is a IEC (Type 2) EVSE rear mount solution that provides low contact resistance and a minimum of 10,000 mating cycles. It is available for single and three phase charging systems and has a current rating up to 63A.

The new Gen 2+ contact system utilizes a canted coil spring design that delivers extended lifetime usage and minimizes mechanical stress, miss-alignment and power loss.

IEC - ECIV Electric Vehicle Charging Inlet

Designed for the European market, the ECIV Electric Vehicle Charging Inlet is a IEC (Type 2) vehicle side solution that provides low contact resistance and a minimum of 10,000 mating cycles. It is available for single and three phase charging systems and has a current rating up to 32A.

The new Gen 2+ contact system utilizes a canted coil spring design that delivers extended lifetime usage and minimizes mechanical stress, miss-alignment and power loss.

IEC - EJCV Electric Vehicle Charging Connector

Designed for the European market, the ECJV Electric Vehicle Charging Connector is a IEC (Type 1) vehicle coupler solution that provides low contact resistance and a minimum of 10,000 mating cycles. It is available for single phase charging systems and has a current rating up to 32A.

The new Gen 2+ contact system utilizes a canted coil spring design that delivers extended lifetime usage and minimizes mechanical stress, miss-alignment and power loss.

IEC - EJIV Electric Vehicle Charging Inlet

Designed for the European market, the EJIV Electric Vehicle Charging Inlet is a IEC (Type 1) vehicle side solution that provides low contact resistance and a minimum of 10,000 mating cycles. It is available for single phase charging systems and has a current rating up to 63A.

The new Gen 2+ contact system utilizes a canted coil spring design that delivers extended lifetime usage and minimizes mechanical stress, miss-alignment and power loss.

IEC -ECCV Electric Vehicle Charging Connector

Designed for the European market, the ECCV Electric Vehicle Charging Connector is a IEC (Type 2) vehicle coupler solution that provides low contact resistance and a minimum of 10,000 mating cycles. It is available for single and three phase charging systems and has a current rating up to 63A.

The new Gen 2+ contact system utilizes a canted coil spring design that delivers extended lifetime usage and minimizes mechanical stress, miss-alignment and power loss.

J1772 - J2CE Electric Vehicle Charging Connector

Designed for the US and Japanese market, the J2CE Electric Vehicle Charging Connector is a SAE J1772 vehicle coupler solution that provides low contact resistance and a minimum of 10,000 mating cycles. It is available for single phase charging systems and has a current rating up to 75A.

The new Gen 2+ contact system utilizes a canted coil spring design that delivers extended lifetime usage and minimizes mechanical stress, miss-alignment and power loss.

J1772 - J2IV Electric Vehicle Charging Inlet

Designed for the US and Japanese market, the J2IVElectric Vehicle Charging Inlet is a SAE J1772 vehicle side solution that provides low contact resistance and a minimum of 10,000 mating cycles. It is available for single phase charging systems and has a current rating up to 80A.

The new Gen 2+ contact system utilizes a canted coil spring design that delivers extended lifetime usage and minimizes mechanical stress, miss-alignment and power loss.

KJ / D38999-Style Series II

Weight-reduced and low profile circular connector ideally suited for avionic applications where space and weight are prime considerations. High density layouts with up to 128 data connections and power contacts rated up to 23A. Features proven bayonet coupling, optional grounded plug for superior EMI shielding and rear-release contacts. Designed to be comparable with 38999 Series 2 specifications. 

This product is not covered by the QPL/QML.

KJA / KJB / D38999-Style Series III

Our KJA/KJB D38999-Style Series III interconnects are designed for use in harsh military and aerospace environments. They feature high density layouts with up to 128 data connections and power contacts rated up to 23A, as well as triple-start coupling with anti-decoupling ratchet for high vibration applications, grounded plug for superior EMI shielding and 100% scoop-proof contacts for blind-mate coupling.  

This product is not covered by the QPL/QML.​

KJL Series- D38999-Style Series I

ITT Cannon KJL 38999-Style Series I connectors offer high-density contact arrangements in a light-weight miniature circular connector. ITT Cannon KJL series connectors are an industry standard for military and aerospace applications. The environmentally sealed KJL series features quick-mating, three-point bayonet coupling and operates across a wide temperature range

*this product is not covered by DLA QLP. 

KPSE / M26482 Series I / VG95328

Cannon's KPSE miniature circular connectors are designed to German VG and US MIL-DTL-26482 specification (formerly MIL-C-26482) with a positive three point bayonet coupling, five-keyway polarization and high insert arrangement contact density. The KPSE series are high-performance crimp connectors that feature “clip-in” contact and insulator design and are optimized for fast assembly and high-volume production environments. KPSE connectors are intermateable with most connectors and accessories manufactured in accordance with MIL-DTL-26482 and VG95328 standards. These highly-engineered, ruggedized connectors are designed for durability and reliability in harsh-environment applications such as military vehicles and helicopters, industrial transports and commercial aerospace in-flight entertainment systems.

 

KPT /MIL-DTL-26482 Series I

Cannon's KPT miniature circular connector series is designed per MIL-DTL-26482 standards. It has a positive three-point bayonet coupling, five-keyway polarization and high insert arrangement contact density. A general purpose connector that uses solder-type contacts, KPT is the go-to solution when small or prototype quantities are required. These ruggedized, mini-circular connectors are engineered for durability and reliability in harsh environment applications.

 

KPTC

The KPTC series is a miniature circular quick disconnect bayonet connector housing crimp termination contacts.  It is environmentaly sealed and designed to meet the requirements of today's commercial electronic industry. They are designed to be intermateable and intermountable with all connectors manufactured according to Mil-DTL-26482 and German military VG specification VG95328.  

 

MD* PCB Plastic Micro-D

Our MD* PCB Microminiature Connectors are designed with standard, all-plastic shells for use with flex circuitry, printed circuit and multi-layer boards. They are easily mounted and soldered, and offer high density and high reliability in board-to-board and board-to-cable applications. MD* PCB connectors are extremely small, lightweight and ruggedized for exceptional performance in the harshest environments.

MD* Plastic Micro-D

Cannon's MD* Plastic Micro-D Connectors feature space & weight-saving designs that are ideally suited for Aerospace, Military & Industrial applications. Available in a wide range of configurations and materials including 2 different insulator materials, 2 mounting variations, 7 shell sizes accommodating from 9 to 51 contacts, and a special arrangement of 5 micro contacts and 2 coaxials. Insulator materials give this connector wide versatility in most applications. A variety of stranded or solid wire can be terminated directly to the MD* Plastic Micro-D contacts, which is often desirable in high density arrangements.
 

MDM C/P Mixed Signal Micro

Cannon offers three options of our MCP Coaxial/Power Mixed Signal Microminiature Connector:
MDM Coaxial: The MDM Metal Shell Connectors have been tooled in several coaxial layouts, offering the versatility of combining coaxial &  signal lines in the same connector. Standard coax is RG178 white.
MDM Power: The same insulator that is used with coaxial contacts is available with power contacts, offering the versatility of combining power and signal lines in the same connector.
MDM Coaxial/Power: Power and coaxial contacts can be interchanged as desired.

MDMH Hermetic Micro-D

Our MDMH Microminiature Connectors are ideal for applications that require more robust sealing than can be achieved with epoxy resins. The MDMH uses size 24 AWG contacts that are compression glass sealed through a steel shell and into a diallyl pthalate front-end insulator. When mated, an interfacial seal provides  environmental protection. We recommend MDMH receptacles be soldered to the chassis or container for a completely leak-proof joint. MDMH receptacles mate with standard MDM plugs.

MDM-PCB Micro-D (MIL-DTL-83513)

Cannon's MDM PCB Micro-D Connectors are designed to MIL-DTL-83513 specifications and engineered for use with flex circuitry, flat cable and printed circuit boards or multi-layer boards. These  interconnects use a standard Cannon MDM metal shell and provide high density and high reliability in board-to-board, board-to-cable and cable-to-cable applications. Our MDM-PCB Micros are available in 8 shell sizes with 9 to 100 contacts. Terminations may be straight (BS) or at 90° right angle (BR, CBR) board thickness. Jackpost mounting for use with locking hardware is also available.

MEB Micro Edgeboard

Our MEB Microminiature Edgeboard Connector series offers a combination of high density and high reliability for applications in aerospace systems, computers and peripherals and industrial-based commercial control systems. This series incorporates the proven MicroPin^TM / MicroSocket^TM contact for high reliability. It features machined aluminum shells for ruggedness, diallyl phthalate insulator for topelectrical performance and a 36-position polarization key system to prevent cross plugging. 

Micro MDM / MDLM - 200°C High-Temperature

Cannon’s F222 High Temp Micro – MDM / MLDM Series offers exceptional reliability and performance in a lightweight, space-saving design. Its design is based on MIL-DTL-83513 specifications, but qualification tested to withstand 200ºC continuous operating temperature to service a wide range of applications include launch systems, smart weapons system to downhole drilling. The High Temp Micros supports current ratings up to 3A, 500 mating cycles and comes in a wide range of configurations include standard or low-profile stranded wire, solid wire, solder pot and board mount (PCB).
 

Micro Plastic Connectors with Jack Screw Coupling - MJS Series

The MJS jackscrew series provides a reliable interconnect for board-to-board, board-to-cable and in-line cable-to-cable applications. Layouts accommodating up to 76 MICROPIN/MICROSOCKETTM contacts are available, with the same wide range of options as are offered with the other MICRO Line products.

MIK Micro Circular

Our MIK Microminiature Circular Connector is designed to accommodate up to 55 contacts on .050 (1.27) centers (equivalent to 420 contacts per square inch). Five keyway polarization prevents cross plugging. The threaded coupling nuts provide strong, reliable coupling. MIK receptacles can be either front or back panel mounted; in back mounting applications, panel thickness of up to 3/32" can be used on the larger sizes. Maximum temperature range - 55°C to + 125°C. Standard MIK connectors are available in two shell sizes accommodating two contact arrangements pre-wired to your specific requirements.

MIKM Micro Circular

Cannon's MIKM Microminiature Circular Connector is designed with a steel shell and receptacle for improved ruggedness and RFI resistance. It accommodates up to 55 contacts on .050 (1.27) centers (equivalent to 420 contacts per square inch) and features 5 keyway polarization to prevent cross plugging. The threaded coupling nuts offer strong, reliable coupling. MIKM receptacles can be either front or back panel mounted; in back mounting applications, panel thickness of up to 3/32" can be used on the larger sizes. Maximum temperature range - 55°C to + 125°C.

MIKQ Push/Pull Micro Circular

Cannon's MIKQ Push/Pull Microminiature Circular Connector features a quick disconnect metal shell and receptacle version that can be instantly disconnected, while also providing a solid lock when engaged. Applications include commercial TV cameras, portable radios, military gun sights, airborne landing systems and medical equipment. Maximum temperature range - 55°C to +125°C.

MIL-DTL-24308-Qualified D-Sub Connectors - D*MM / M24308 Series

The D*MM / M24308 Class G D-Sub is a Standard Density Connector that features fixed contacts in solder cups, straight and 90° PC contact terminations. It is available with a wide range of accessories and is an ideal solution for harsh environment applications including Military Aviation, Commercial Aircraft and Aerospace Launch Vehicles. 

MIL-DTL-5015 (A&B) / CA Threaded Series

The CA Threaded / 5015 MS A&B Series is a general duty circular connector manufactured to meet Mil-C-5015.  It houses a plastic insulator and designed to maintain the machined solder cup contact orientation during soldering.  The shell components are fabricated from high grade aluminum alloy to provide a robust solution for all unsealed applications.  The contacts are machined for strength and durability and plated with silver to maintain signal integrity.  The shells are plated with an environmental green or our RoHS black zinc plating.

MIL-DTL-5015 (E&R) / CA Threaded Series

The CA Threaded / MIL-DTL-5015 (E, R &F) connectors are qualified to the MIL-C-5015 standards and have resilient insulators and wire sealing grommets for extreme environmental conditions and high altitude sealing.  The contacts are bonded to the insulator as well as the insulator to the shell for environmental sealing.  The MS-R has a shorter, lighter weight endbell without the cable clamp.  Bothe the MS-F and MS-R have o-rings to suppliment the interfacial seal.  Shells are aluminum allow and gererally plated with OD Cad or our RoHS black zinc.  The MS E, R, or F series is also available with crimp  contacts using a modification code of F80 after the description.

MIL-DTL-83513 Series Micro-D Connectors

Cannon MIL-DTL-83513 Series Micro-D interconnects and cable assemblies are ideally suited for applications requiring extremely small, lightweight and ruggedized solutions with higher density contact configurations. Our M83513 Micro-D Connectors are available in eight shell sizes that accommodate from 9 to 100 contacts. hese robust, space-saving MIL-DTL-83513 qualified interconnects meet ongoing industry demand for environmental, high performance and moisture-sealed Micros that perform reliably in the harshest environments. Our 83513 Micro-D Connectors are ideally suited for missiles and ordnance, aerospace launch vehicles, oil and gas exploration and industrial automation applications.

Mini-XL Audio Connector

• ITT XLB male and female PCB flange mount receptacles are plastic
• Low cost alternative to our metal XLM-CPB Connectors

MKJ Clip Lock Miniature Circular Connector

Today’s commercial aerospace manufacturers & defense contractors are increasingly challenged to meet the ongoing demand for lighter, high reliability interconnect solutions that support a wide range of applications. Our new MKJ Clip Lock Miniature Circular Connector offers an ideal solution for today’s connectivity needs. Small, lightweight and competitively priced, the MKJ CL repurposes a clip lock latching system originally designed for the automotive industry. By eliminating higher cost components, we transformed it into a mil-style connector with a proven snap on positive lock dimension that is both robust and cost efficient.

MKJ Warrior Series

Part of the MKJ family of miniature circular connectors, ITT Cannon’s MKJ Warrior Series offers a reliable interconnect solution that enables critical communication, navigation and USB data/power for modern soldier applications. The MKJ Warrior Series provides a robust breakaway coupling system, designed per the US Nett Warrior* specification and qualified to the European GOSSRA standard.

MKJ0 UN Thread Coupling

Part of our innovative family of MKJ Miniature Circular Connectors, the MKJ0 UN Thread is a lightweight, high density solution that features threaded coupling and uses removable size 23 contacts on .076 spacing. It is up to 52% smaller and 71% lighter than standard military-grade connectors and offers highly engineered design, performance and reliability, but in a much smaller design package. Our MKJ Connector Series Connectors also come with rear accessory threads or integral band platform for direct attachment of cable shield and overmold.

MKJ1 Double Start Coupling

Cannon’s MKJ1 Double Start offers threaded coupling features and high density size 23 machined contacts for crimp and PCB. Part of the MKJ Series of Miniature Circular Connectors, it is up to 52% smaller and 71% lighter than standard military-grade connectors and offers highly engineered design, performance and reliability, but in lightweight, space-saving design.

MKJ3 Bayonet Coupling

At half the size and weight of traditional military standard connectors, MKJ3 Bayonet features threaded coupling with high density size 23 machined contacts for crimp and PCB. Bringing together a unique combination of design, functionality and flexibility, Cannon’s MKJ3 Bayonet offers proven, reliable and cost-effective interconnect solutions that enable critical communication, navigation and high speed data transmission in the harshest environments.

MKJ4 Breakaway (Quick Disconnect) Coupling

Part of the MKJ family of miniature circular connectors, ITT Cannon’s MKJ4 Breakaway features a canted retention spring disconnect coupling mechanism. This durable coupling mechanism allows for quick and easy mating and de-mating. MKJ4’s versatility, performance and reliability enable unparalleled functionality to support critical communication, navigation and high-speed data transmission needs, at half the size and weight of traditional connectors.*
 
*When compared to the 38999 layouts with size 22 contacts

MKJ5 Triple Start Ratchet Coupling

ITT Cannon’s innovative MKJ5 features threaded coupling with high density size 23 machined contacts for crimp and PCB. Its unique triple-start threaded coupling mechanism allows MKJ5 to quickly connect and disconnect, up to 500 cycles, while maintaining performance under sustained shock and vibration conditions. The MKJ5 offers flexibility in configuration options for connectivity, multiple keying positions, and rear accessory threads or integral band platforms. It meets customer requirements for extended cycles in robust shock and vibration environments through its high-reliability internal ratchet mechanism system.

Modular APD Interface

The ITT Cannon Modular APD Interface ensures installing, reconfiguring, mating and un-mating of Cannon’s class leading APD interconnects is simple, fast and pain free. 
 
The system delivers exceptional flexibility to add or change connectors as additional vehicle services are developed and to implement standardized yet customizable connector systems for multiple applications.

MT PCB Strip-Style Micro

Cannon's MT PCB Strip-Style Micro Connectors (Microstrips) provide an extremely dense and reliable interconnection solution in a minimum profile package. They offer exceptional application flexibility and are available with latches or guide pins. Microstrips are frequently found in board-to-wire applications, where high reliability is a primary concern. Three termination styles are available: solder cup, pigtail, harness or printed circuit leads. The MicroPin^TM Contact System assures maximum performance in a space-saving design package.

NDD M32139-Style Nano D

Our NDD M32139-style Nano-D is a small form factor, high density interconnect designed and manufactured for high reliability and harsh environment applications. These interconnects are ideal when size and weight limitations require an ultra low profile and robust design package. Utilizing our innovative twist pin contact system on 0.025 contact spacing and 5 points of electrical contact, the NDD series offers an extremely rugged small form factor interconnect solution. Typical applications include military avionics, oil & gas industry exploration and missile systems.  

Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML.

NDM Nano Microminiature Connectors

NDM Nano Microminiature Connectors are small form factor, high density interconnects designed for high performance and reliability in harsh environment applications. These interconnects are ideal when size and weight limitations require an ultra-low profile and robust design package.They feature Cannon's twist pin contact system, which offers superior electrical and mechanical technology that outperforms traditional machined or stamped electrical contract solutions. Highly reliable twist pin technology also enables continuity in very dense areas and severe shock and vibration environments. 

Nemesis II CBA 20M+ Connector

Nemesis II CBA 20M+ features high pressure sealing capability for water submersion of more than 20 Meters (65.6 Feet). The Nemesis II CBA 20M+ exceeds expectations by outperforming the competition in extreme conditions and harsh environments. Delivering reliable power, signal and data in a smaller, more robust and integrated design package, the Nemesis II CBA 20M+ helps soldiers reduce physical load, maintain communication and receive mission-critical information when they need it most.

NetSplice for High-Speed Cabling Splicing

NGCON Fiber Optic

Fiber optic cable assemblies qualified to Navy requirements for shipboard and Airborne applications.

NJS Nano Jackscrew

NJS Nano with center jackscrew incorporates Cannon's proven twist pin contact system, which features superior electrical and mechanical technology that outperforms traditional machined or stamped electrical contract systems. Highly reliable twist pin technology allows continuity in very dense areas and severe shock and vibration environments, and it often requires low engagement and separation forces. Nano Jacksrew Connectors are frequently used for oil & gas industry exploration and extraction applications. 

NTP Nano Strip

NTP Nano Strip incorporates the highly reliable Twist Pin concept, which allows continuity in very dense areas and under severe shock and vibration, requiring low engagement and separation forces. Termination can consist of uninsulated pigtails or insulated wire all pre-harnessed at our factory to your specifications. Successful applications for NANO connectors are many and varied, from the Air Force's AIRS program to actual human implantations in the medical research field.

OctoGig 10 Gb Ethernet Solution

An ultra-high speed, 10 Gb Ethernet interconnect solution for commercial aviation, military aircraft and marine applications, ITT Cannon's OctoGig^TM is smaller, lighter, easier to install and offers significant increases in data transfer rates compared to existing solutions on the market. A high-bandwidth data offering that offers a tenfold increase in transfer rates, OctoGig’s eight-conductor termini provides reduced size and weight, ease of installation and transfer rates to 10 Gbps, generating higher-performance and cost-efficiency. OctoGig can be integrated into a variety of popular connector systems to satisfy a diverse spectrum of applications in Aircraft Navigation & IFE applications

PHD 38999-Style Fiber Optic Connector

Designed to be comparable with MIL-DTL-38999 envelope dimensions including standard polarization, backshell threads and panel cut-out / mounting holes. Key features include Cannon's PHD Optical Contact System; all metallic 38999-compatible outside dimensions, internal metallic web for EMI suppression and terminus stability; standard 38999-style keys; all metallic backshell with sealing grommet; size 22 and size 16 termini back body; and removable alignment insert assembly mountable in either plug or receptacle.

PHD Panel Mount Fiber Optic

Cannon's PHD Panel Mount is a high density rectangular interconnect solution that incorporates a low profile design with a discrete keyed contact system for repeatable low loss optical performance. It is a highly engineered three piece connector with multiple features including bulkhead feedthru design in standard 8, 16, 18 and 32 channel configurations; PHD Optical Contact System (Tuned size 22 Termini); all metallic bodies for radiated emission suppression; internal metallic web for EMI suppression and terminus stability; integrated metallic shutter system for reduced eye hazard; all metallic backshell; and removable alignment insert assembly mountable in either plug or receptacle.

PHD SuperLC Fiber Optic

Cannon's PHD SuperLC Fiber Optic is a harsh environment, small form-factor connector system. It provides a higher thermal environment and superior mechanical environment stability/durability than a standard LC connector, while maintaining the same high-end optical performance characteristics that support both single mode and multi-mode fiber configurations.
 

Powerlock

The ITT VEAM PowerLock connectors are plastic bodied single pole connectors for use in high power, low voltage applications.  With current ratings of either 400amp or 660amp, the connectors are keyed to prevent connections with the wrong line, and colour coded to meet various international 3 phase electrical standards.  Unmated, the connectors are rated IP2X for protection against finger touching of live electrical parts and when mated are sealed to IP67. Body styles include those for panel mounting or for fitting to a wide range of copper cables up to 300mm².  A selection of accessories and network connection devices are available to enhance the range

Powerlock Box

A PowerLock Box is a 3 phase high power connecting unit, used as a termination point for power cables. The boxes include a number of safety features to prevent incorrect connection and disconnection. All PowerLock devices are ‘keyed’ to eliminate the possibility of connecting with the wrong line, and color coded to suit international 3 phase standards. Anywhere that you are unable to rely on a public utility power source, a PowerLock Box can provide a connection point for a mobile generator, into your low voltage (1500 volt DC) network.

PV 26482-Style Series II

Designed to be comparable with Mil-DTL 26482, this high performance connector offers environmental sealing protection, and machined gold plated crimp contact terminations.  Intermateable with existing Mil-DTL 26482 series type connectors.  Temperature operating range from -55 deg C to 200 deg C.

This product is not covered by the QPL/QML.

QLC - Miniature Zero Insertion Force

ITT expands its DL Family of Connectors with the Miniature QLC device to meet size, reliability, and mating requirements for Portable Medical Equipment. Similar to the DL Series connectors, the QLC connector is highly reliable, easily assembled during harnessing and features a high pin count, 260 contacts in PC Board-mount style. The receptacle is available in both standard solder tail and press-fit contacts. The QLC employs rugged nickel-plated aluminum housing and features a minimum rated life of 20,000 mating cycles with no performance loss. The interface of the QLC connector utilizes EMI springs and a shield-locking mechanism to ensure uniform mating pressure around the perimeter of the mated connector, creating an EMI/RFI shield.  With the current technology advances requiring smaller connection systems, ITT reduced the size from the current DL by more than 60% with the same number of contacts.

QLC with Solderless Plug - Miniature Zero Insertion Force

The QLC solderless plug is a groundbreaking 260 pin Zero Insertion Force connector that eliminates the need for hand soldering fine pitch contacts onto printed circuit boards, significantly reducing time and cost in the assembly process.

It eliminates the need for soldering by deploying a two card edge design with a slider that enables simple insertion and results in a high contact force connection to the PCB.

Derived from the existing marketing leading QLC product range, the new QLC solderless plug is fully intermateable with existing receptacles.

Ring Tongue Connector

ITT Cannon Ring Tongue is single way, high voltage & current, IP sealed connector, which provides 360 degree electromagnetically shielding.
 
It is available in both flange mount & jam nut mount options and is applicable for 20mm²,35mm², 50mm²& 70mm² shielded cable. Compact and robust with an aluminum shell  it is ideal for mass transit and electric vehicle applications.

Rock-in-Lock (RIL) Latching Connector

Rock-in-Lock^TM (RIL) is a small receptacle connector about the size of a flash drive that can be worn on a soldier or first responder’s helmet, or attached to field-use computer tablets and communication units. It is low profile, lightweight and capable of transferring a significant amount of power and data that is needed to operate a number of devices, from augmented reality goggles to tactical combat radios. RIL’s advanced design and quick connect mechanism offer performance, reliability and time savings. A single-hand connector, RIL allows the user to blindly install the mating interface, without the need for a special mechanism like a thumbscrew, latch or coupling tool.

RPR EN4165-Style Connector with PCB Contacts

Cannon's RPR modular rectangular solution is comprised of shells, plates, inserts and a proprietary latching mechanism that are integrated in a lightweight, space saving design. It is an ARINC 809-compatible interconnect that enables high-speed data transfer, signal integrity and secure connectivity in commerical aerospace IFE/C & avionics applications. A front release, rear removable insert and proprietary latching mechanism make service, repair and maintenance easier. It uses various sizes of PCB contacts in both straight and right angle configurations, and offers additional accessories for Line Replaceable Unit (LRU) applications. 
 

SGA Single Gang ARINC 600 Rack & Panel

Cannon SGA Connectors are single gang interconnects that utilize the ARINC 600 signal cavity inserts and contacts, including Cannon Multi-Signal Quadrax Contact Systems, Co-Ax, Twinax, Triax and Fiber Optics. These space-saving interconnect solutions are ideally suited for environments where there are space constraints in which a standard ARINC 600 connector cannot be used. Our SGA Connector accommodates up to 150 contacts with a smaller shell than the size 2 ARINC 600 and offers more contacts than the single gang DPX.

SJS Series - Super Jacketing System

Harsh Environment Jacketing System for Cabling, Over Molding, Wire & Conduit Systems
The ITT Cannon Super Jacketing System (SJS Series) offering a flexible Silicon-based jacket material and over-molding compound with high UV protection, wide temperature range and flame resistance for any harsh environment. The SJS Series, a flexible silicon-based material, can be applied as an over-molding protection on a point-to-point cable, or to a complex wire harness with several branches, protecting your critical data, power and signal cable and wiring system.

SLC Push Pull Plastic

Superior environmental sealing IP68, Available in layouts of 5,8,10 and 15 contacts, current max rating 5A, audible and tactile feedback when mating.

SLC-T Latching Circular Plastic

Superior environmental sealing IP68, Available in layouts of 5, 8 and 10 contacts, Current max rating 5A, Audible and tactile feedback when mating.

SMA/SMB/SMC/RF

SMA plugs are enviromentally sealed; Intermateable with all SMA connectors; Up to 18 GHz;  threaded coupling method;  SMB connectors have a snap on coupling, operate up to 4 GHz;  SMC connectors have a threaded coupling, operate up to 10 GHz.

Snaplock

The ITT VEAM Snaplock connectors are plastic bodied single pole connectors for use in low voltage power applications up to 250amp. The connectors are available in a number of colours and are sealed to IP65 when mated. Connector body styles are available for panel mounting or for fitting to copper cables up to 70mm²

SURE-SEAL

Watertight and chemical resistant connectors with up to 100 mating cycles. The SURE-SEAL series features a simple one-piece molded elastomeric body. Contacts are the only components needed to assemble this connector. These field serviceable sealed connectors satisfy all of the parameters defined by automotive / industrial standards including vibration, shock, temperature cycling, salt water spray, petroleum derivatives, industrial gases, and most important low millivolt drop and low contact resistance.

TD1 Filtered D - Subminiature

Filtered D-Sub connectors for noise filtering, EMI, and EMP applications.
Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML.

TDPX Filtered ARINC 404 Rack & Panel

Filtered Rack and Panel connectors for noise filtering, EMI, and EMP applications.

Tight Tolerance Fiber Optic 38999 Series III - KJAF Series

Extend the service life of connectors, contacts and cable harnesses that are subject to extreme use and repetitive mating and de-mating by installing an ITT Cannon Tight Tolerance SVR 38999 Series III Fiber Optic Connector Saver between the Unit Under Test (UUT) and test equipment. Our SVR 38999 Connector Saver protects your connectors by absorbing the wear and tear associated with mating and de-mating during the testing process, allowing your cable harness to remain in its original condition for final installation. It\ features a removable contact system that can be easily replaced after it becomes worn or damaged, with far less cost than replacing the mounted box cable harness.

Tin Zinc J Plating

ITT Cannon’s Tin Zinc J Plating is an ultra-harsh environment formulation that meets or exceeds the VG (German Military) performance requirements of cadmium. It is a highly conductive (< 5m ohm) and corrosion-resistant (500 hours static / 5 days cyclic salt spray) matt grey, non-reflective solution.

Developed for extreme military environments; Tin Zinc J Plating is also ideal for the harshest industrial applications where cadmium level protection, and more, can be delivered in a RoHS and REACH compliant solution.

TKJ / TKJA / TKJB Filtered D38999-Style

Robust, circular connector series for noise filtering, EMI, and EMP applications.

The TK series is a 38999-style / KJ connector. 
 

TMDM Filtered Micro-D

Our TMDM Filterted Microminiature Connectors feature transverse monolith filters for noise reduction and EMI, RFI and EMP shielding. They are ideally suited for commerical aerospace, military avionics and military equipment applications. The TMDM is designed with Cannon's own Twist Pin Contact System and is environmentally sealed. The TMDM receptacle accommodates from 8 to 37 sizes, 24 AWG socket contacts on 1,27 (.050) centers and mates with standard MDM Microminiature Connector plugs. 

Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML.

TPV Filtered 24682-Style Series II

Filtered 26482-Style connectors for niose filtering, EMI, and EMP applications.

 

Trident Flame Retardant (TFR)

Cannon’s Trident Connector System is a versatile range of connectors based on a standard contact design. These contacts are fully interchangeable throughout the Trident series. Trident Flame Retardant - This new connector series is compliant to railway standards. The material properties are I2/F2 according to NFF 16-101 & 16-102. These are low installed cost connectors rated for up to 13 A and 250 V ac. They are typically used for circuit board and internal wiring applications. All flame retardant connectors are RoHS Compliant.

Trident High Voltage (THV)

Cannon’s Trident Connector System is a versatile range of connectors based on a standard contact design. These contacts are fully interchangeable throughout the Trident series. Trident High Voltage - This new connector series is based on the Trident Neptune Metal housing. The insulator body has been designed for high voltage applications. These connectors are rated for up to 34 A (for wire size 4,0 mm² at 20°C) and 500 V AC. This connector series is VDE certified

Trident Neptune (TN)

Cannon’s Trident Connector System is a versatile range of connectors based on a standard contact design. These contacts are fully interchangeable throughout the Trident series. Neptune is a range of circular connectors specifically designed for harsh environment applications. They come with membrane wire seals that meet the requirements for IP67 and do not require blanking plugs for unused cavities. They will accept various combinations of signal (13 A) and power (30 A) contacts. The receptacle connectors feature stainless steel bayonet pins integrally molded into the bodies. The plug connectors are available with either high strength metal or corrosion resistant plastic coupling rings. All Neptune Circular Connectors are RoHS Compliant.

Trident Neptune Metal (TNM)

Cannon’s Trident Connector System is a versatile range of connectors based on a standard contact design. These contacts are fully interchangeable throughout the Trident series. TNM (Trident Neptune Metal) is specifically designed to meet the needs of systems that require shielding, sealing, and the extra durability of a metal shell. The combination of Trident contacts, membrane seals, and the Universal Shielded Endbell make TNM both cost effective and easy to assemble. TNM features nickel plated zinc alloy shells and UL 94 V-0 rated thermoplastic insulators.

Trident Power Contacts

• Power contacts up to 40 A
• To be used for mixed or power layouts with Trident Neptune (TN), Trident Neptune Metal (TNM) and Trident High Voltage (THV)
• Plating: tin (APK Contacts); gold (D-Subminiature Contacts) for up to 500 mating cycles

Trident Ringlock (TR)

Cannon’s Trident Connector System is a versatile range of connectors based on a standard contact design. These contacts are fully interchangeable throughout the Trident series. Ringlock is a range of robust circular connectors for industrial applications. It uses a metal bayonet coupling system for quick and reliable connections and thermoplastic bodies for low installed cost. The connectors are available in several sizes ranging from 4 to 48 circuits. With the addition of a cable clamp, the connectors can be water sealed to meet IP65. All Ringlock connectors are recognized under the component program of UL Inc. and RoHS Compliant.

Trident Snap Together - Rectangular (TST)

Cannon’s Trident Connector System is a versatile range of connectors based on a standard contact design. These contacts are fully interchangeable throughout the Trident series. Trident Snap Together Rectangular - These are low installed cost connectors rated for up to 13 A and 250 V AC. They are typically used for circuit board and internal wiring applications. Snap Together connectors facilitate easy assembly and removal of equipment such as motors, fans, transformers, etc. All Snap Together - Rectangular connectors are RoHS Compliant and recognized under the component program of UL Inc.

Trident Snap Together - Slimline (TST)

Cannon’s Trident Connector System is a versatile range of connectors based on a standard contact design. These contacts are fully interchangeable throughout the Trident series. Trident Snap Together Rectangular - These are low installed cost connectors rated for up to 13 A and 250 V AC. They are typically used for circuit board and internal wiring applications. Snap Together connectors facilitate easy assembly and removal of equipment such as motors, fans, transformers, etc. All Snap Together - Rectangular connectors are RoHS Compliant and recognized under the component program of UL Inc.

Trident T2P Contacts

• Two piece stamped & formed signal contact for wire sizes AWG 26 - 14 / 0,14 - 2,5 mm²
• Fits into all Trident signal cavities
• Three retention latches and an optimized body shape for an excellent contact alignment leading to secure connector mating
• Platings: tin, flash gold, gold and silver for up to 200 mating cycles
• Quick and cost effective assembly, no insertion and only one simple extraction tool required

Trident T3P Contacts

• Three piece machined contact for wire sizes AWG 26 - 14 / 0,14 - 2,5 mm²
• Fits into all Trident signal cavities
• Platings: tin, flash gold and two gold platings for up to 500 mating cycles
• Quick and cost effective assembly, no insertion and only one simple extraction tool required

Ultra-High Temperature Micro-MDM

Cannon’s Ultra-High Temp Micro-MDM F300 Series offers exceptional reliability and performance in a lightweight, space-saving design. It is qualification tested to withstand 230ºC continuous operating temperature for 500 hours and meets the harsh requirements of the Oil and Gas exploration industries, which exceed those of the M83513 specification. It is designated by an F300 modification code and uses high performance Micro Twist Pin Contacts, special insulating materials and high temperature wire. It is ideally suited for a wide range of harsh environment application including Oil & Gas Exploration, Aerospace & Defense, Industrial and Transportation.

Universal Contacts PCB Contact System

ITT Cannon's Universal Contact Series (UC) is a Surface Mount Technology (SMT) sysmte with a single piece of stamped and formed copper alloy;  3000 mating cycles;  2A max continuous;  free heights ranging from 1.3mm to 4.6mm;  pre-load forces;  low contact resistance;  solderwell feature preventing flux migration;  anti lift features during pick and place processes; available in BeCu or TiCu.

Veam CIR & FRCIR

Cost effective highly engineered industrial circular connectors ideal for exterior exposure and transportation applications. This broad series of connectors is available in 256 different layouts and with a wide range of accessories.

Shell material options include Aluminium Alloy, Stainless Steel and Marine Bronze

Veam CIR Fiber Optic

Veam's CIR Fiber Optic connectors deliver single and dal mode fiber optic capability and meet VG95234 / MIL-DTL-5015 specification. They meet UL94 VO fire and smoke standards and are available with a wide variety of environmental plating options.

Veam CIR M12

Bayonet coupling circular connectors for harsh environment Ethernet communication applications.

This high speed connector solution is a combination of M12 contacts mounted into Veam FRCIR connector series hardware.

Supporting gigabit communication the CIR M12 enables transfer of data from Ethernet, MVB, WTB, and Video lines, according to VG95234, within the same connector.

Veam DSR

Veam DSR is a double ratchet aluminium connector with a shell based on Mil-C-38999 and insert on Mil-C-5015. It delivers exceptional resistance to temperature extremes (-70C to 200C) and is available with 1 to 159 pins.

Veam FRCIR290

Veam's FRCIR 290 is a ruggedized VG95234 / MIL-DTL-5015 power and signal connector offering between 3 and 101 pins, IP67 sealing and 2000 mating cycles. 

Veam FRMGCIR

Veam's FRMGCIR is a ruggedized VG95234 / MIL-DTL-5015 power and signal connector offering between 1 and 159 pins, IP67 sealing and 2000 mating cycles. 

Veam HTB

The HTB Series of high temperature circular connectors have been developed to meet the  European Rail Agency (ERA) specific requirements (TSI - Technical Specifications for Interoperability) for safety in Railway Tunnels.
 
HTB connectors are based on the design of the VEAM CIR series are tested to withstand 800°C (ISO 834-1 heating curve) for nearly 30 minutes while maintaining critical control signals. This exceeds the ERA requirement of 15 minutes.

Veam MOVE-MOD

The MOVE-MOD™ series provides the ultimate in modularity and flexibility by utilizing a range of snap in modules that enables a variety of contact layouts and the ability to deliver power, signal, and data in the same connector.

Featuring a unique ultra-secure bayonet coupling mechanism with secondary locking, MOVE-MOD’s circular form factor minimizes weight and footprint size. With toolless assembly and installation, it is extremely quick and simple to work with.
 


 

Veam Power Plate

ITT Veam’s Power Plate solution is multi-pole power interconnection system, which connects the railcar to the bogie. This customizable solution delivers a compact design and high performance in extreme environments.

 

Veam VA900

Veam VA900 is a VG95234 bayonet connector with IP67 sealing and qualification to the EN 45545-2 and NF F 16-101/102 rail fire and smoke standards.

Veam VBN

The VBN connector series is based on MIL-DTL-5015G and VG95234 specification. They are interchangeable with all corresponding CIR/VG types and feature identical panel mounting dimensions. They are available in 15 sizes arrangements from shell size 16S to shell size 40 with arrangements having from 4 up to 70 contacts.

Veam VIP

The Veam VIP range of circular connectors meets the exacting requirements of the railway industry. This solution allows for easy assembly with no additional tooling required, and a threaded coupling that guarantees a secure connection. The connector is current rated to 700 amps and the multiband has been designed to maximize the number of contacts and provide a reliable high current connection. VIP is flame retardant to CEI UNI 1170 and has a right angled elbow for use in space constrained environments.

Veam VPT

VPT Connectors are ruggedized circular bayonet connectors for harsh environment applications such as vehicle engines. Available in 10 to 12-way variants they deliver IP67 sealing and designed to be comparable with MIL-DTL 26482 Series 1 and VG 95328.

Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML.

Veam VRPC

Rectangular plastic sealed connectors from 3 to 12 contacts for railway, off-road and industrial applications.

Veam VSC

VEAM VSC is a threaded coupling multi-pin cylindrical connector for lighting applications. VEAM is well known for the quality and ruggedness of it’s popular quarter-turn lock “CIR Series” and has utilized CIR’s superior design concepts to provide a very rugged version of the Socapex SL-419 connector family.

XLM-PCB

ITT male and female PCB metal flange mount receptacles offer durability, reliability, space savings. Greatly improved EMI shielding over our plastic XLB-PCB connectors.

XLR

This quick, one touch connect/disconnect circular connector incorporates a design optimized for a wide variety of applications where space is a premium.