ITT Part No

Global MFG Part No

Line

Series

Category

Brand

CA06COM-E16S-1P-A176

121482-0086

CA Bayonet

CA COM

Circular

Cannon

accreditation

ROHS~Consult factory

accreditation

REACh SVHC: consult factory

Part Data

Specifications

Thread Connector with Threaded Coupling
Shell Style Plug, straight
Endbell Style Endbell with clamp (w/o grommet, ferrule and bushing)
Gender Pin
Shell Size 16S
Contact Arrangement 16S-1
Number of contacts 7 contacts size 16S
Contact Type Solder Cup
Contact Plating Gold 0,5 μ
Contacts installed yes

Specifications

Contact Rating at +20 °C (68 °F)
(Size 15/15S/16/16S)
22 A
Contact Resistance
(Size 15/15S/16/16S)
6 mΩ
Operating Voltage In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC 60364-4-41.
Insulator Resistance ≥1000 MΩ
Test Voltage 1600 Vrms
Air and Creepage Paths (Min) 1,1 mm
Ambient Temperature Standard insulator material -55°/+125°C
(-67/257°F)
Mating Cycles 500 min
Sep. Force per Contact
(Size 15/15S/16/16S)
1,0 N
Gauge For infos on Gauge please see catalog
VG95234, part 1

Specifications

Coupling Torque Closing: 3,5 Nm max / Opening: 0,46 Nm min
Contact Retention
(Size 15/15S/16/16S)
35 N
Shell Material Aluminium alloy
Shell Plating Nickel plated
Insulator and Gromet Material CR-Elastomere
Contact Material Copper alloy
Harnessing Info: Contact Cross-Section See assembly instruction
Harnessing Info: Insulator Diameter See assembly instruction
Wire Stripping
(Size 15/15S/16/16S)
6,2 mm
General Info All tests in accordance with VG95319 and/or if applicable with VG95210 except salt spray resistance and heat and humidity endurance test

Stock Availability

Distributor Name PartNum Quantity Region Shopping Cart
TTI Inc - Europe CA06COM-E16S-1P-A176 90 Europe shopping cart
Cambridge Technologies CA06COM-E16S-1P-A176 100 Asia shopping cart
PEI-Genesis, Inc. CA06COME16S-1PA176 210 Europe shopping cart

Note: Data provided here are offered in good faith and are as reliable and accurate as possible. However, they do not form part of any contract of supply or purchase unless specifically confirmed in writing by an authorized representative of ITT. All information and images shown are the property of ITT ICS and are not to be reproduced in any form without direct authorization from ITT ICS. ITT ICS strongly recommends that you contact your local ITT Sales Office for confirmation of all the details you obtain through these Web pages. Please be aware that data may change at any time and without notice. For a listing of Sales Offices, local sales support, and authorized distributors please use the “Contact Us” at the top of every page.