NEW PRODUCT
CCS2 High Amperage EV Charging Connector - with boost mode up to 500 A
2024 Global Events Calendar
Throughout the year, we will be attending renowned exhibitions & conferences around the world, find out where >>
ITT Part No
Global MFG Part No
Line
Series
Category
Brand
CA3102E14S-6P-B-01-05
121087-0042
CA Bayonet
CA BAYONET
Circular
Cannon
ROHS~Consult factory
REACh SVHC: consult factory
CA3102E14S-6P-B-01-05
CA3102E14S-6P-B-01-05
Part Data
Specifications
| Bayonet | Connector with bayonet coupling |
| Shell Style | Box mounting receptacle (rear mount, through holes in flange) |
| Gender | Pin |
| Shell Size | 14S |
| Contact Arrangement | 14S-6 |
| Number of contacts | 6 contacts size 15S |
| Contact Type | Metric Crimp |
| Contact Plating | Hard silver |
| Shielding | no |
| Contact Rating at +20 °C (68 °F) (Size 15/15S/16/16S) |
22 A |
Specifications
| Contact Resistance (Size 15/15S/16/16S) |
6 mΩ |
| Wire Cross Section | 0,75-1,5mm² |
| Operating Voltage | In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC 60364-4-41. |
| Insulator Resistance | Acc. To VG95319, part 2, test no. 5.12 and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ |
| Test Voltage | 1050 Vrms |
| Air and Creepage Paths (Min) | 0,7 mm |
| Ambient Temperature | Standard insulator material -55°/+125°C (-67/257°F) |
| Safety Provisions | IP67 acc. to DIN 40 050 and IP68 (1 bar pressure for 16h) |
| Salt Spray Resistance | 500 hours salt spray resistant |
| Mating Cycles | 500 min |
Specifications
| Sep. Force per Contact (Size 15/15S/16/16S) |
1,0 N |
| Gauge | For infos on Gauge please see catalog VG95234, part 1 |
| Coupling Torque | Closing: 3,6 Nm max / Opening: 0,35 Nm min |
| Contact Retention (Size 15/15S/16/16S) |
35 N |
| Shell Material | Aluminium alloy |
| Shell Plating | Olive drab chromate over cadmium plating (conductive) |
| Insulator and Grommet Material | CR-Elastomere |
| Contact Material | Copper alloy |
| Harnessing Info: Contact Cross-Section | See assembly instruction |
| Harnessing Info: Insulator Diameter | See assembly instruction |
Specifications
| Wire Stripping (Size 15/15S/16/16S) |
6,2 mm |
| General Info | All tests in accordance with VG95319 and/or if applicable with VG95210 |
Stock Availability
| Distributor Name | PartNum | Quantity | Region | Shopping Cart |
|---|
Note: Data provided here are offered in good faith and are as reliable and accurate as possible. However, they do not form part of any contract of supply or purchase unless specifically confirmed in writing by an authorized representative of ITT. All information and images shown are the property of ITT ICS and are not to be reproduced in any form without direct authorization from ITT ICS. ITT ICS strongly recommends that you contact your local ITT Sales Office for confirmation of all the details you obtain through these Web pages. Please be aware that data may change at any time and without notice. For a listing of Sales Offices, local sales support, and authorized distributors please use the “Contact Us” at the top of every page.