ITT Part No

Global MFG Part No

Line

Series

Category

Brand

KPSE6E16-23S-DZ-A232

121567-0390

26482 - Style Series I & Mil Battery

KPT / SE

Circular

Cannon

accreditation

ROHS~Consult factory

accreditation

REACh SVHC: consult factory

Part Data

Specifications

Shell Style Straight plug
Endbell Style Endbell for shielding braids and shrink boots
Gender Socket
Shell Size 16
Contact Arrangement 16-23
Number of contacts 22 contacts size 20, 1 contacts size 16
Contact Type Crimp Contacts
Contact Plating Size 12 & 16: gold plated
Size 20: Contact body: tin / Contact area: gold plated
Contacts installed not assembled, packed separately
Shell Material Aluminium alloy

Specifications

Shell Plating Zinc cobalt, black
Insulator and Gromet Material Polychloroprene
Contact Material Copper alloy
Water Tightness Acc. To VG95319 Part 2, Test No. 5.9.2
Operating Temperature -55°/+125°C
(-67/257°F)
Mating Cycles 500 min
Vibration 200 m/s² at 10 to 2000 Hz
Contact Rating AWG20 7,5 A
Contact Rating AWG16 13,0 A
Insulator Resistance ≈5000 MOhm

Specifications

Test Voltage 1500 Vrms
Operating Voltage In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC 60364-4-41.
Safety Provisions IP67 acc. to DIN 40 050
(0,2 bar pressure over 48 hrs)
Salt Spray Resistance 200 hours salt spray resistant
General Info All tests in accordance with VG95319 and/or if applicable with VG95210
Harnessing Info: Contact Cross-Section See assembly instruction
Harnessing Info: Insulator Diameter See assembly instruction

Stock Availability

Distributor Name PartNum Quantity Region Shopping Cart
TTI Inc - Europe KPSE6E16-23S-DZ-A232 11 Europe shopping cart
Sistemas de Interconexion SA KPSE6E16-23SDZ-A232 1 Europe shopping cart

Note: Data provided here are offered in good faith and are as reliable and accurate as possible. However, they do not form part of any contract of supply or purchase unless specifically confirmed in writing by an authorized representative of ITT. All information and images shown are the property of ITT ICS and are not to be reproduced in any form without direct authorization from ITT ICS. ITT ICS strongly recommends that you contact your local ITT Sales Office for confirmation of all the details you obtain through these Web pages. Please be aware that data may change at any time and without notice. For a listing of Sales Offices, local sales support, and authorized distributors please use the “Contact Us” at the top of every page.